AGS CN-420 Domestic NiCopp Nickel/Copper Brake Line, 1/4 x 20

AGS CN-420 Domestic NiCopp Nickel/Copper Brake Line, 1/4 x 20

AGS CN-420 Brake Hydraulic Line

Brake Hydraulic Line

FEATURES:

• meeting all international and U.S. requirements for brake tubing. –
  – NiCopp Does Not Rust or Corrode – DOT Approved for Hydraulic Brake Systems – Bends 58% Easier than Steel Tubing and is available in 25, 50, and 100 ft lengths – Finished
• AGS coils are the same copper nickel alloy tubing as used in our pre-made lines.
  – This NiCopp kit is an economical solution for shops and DIY’ers who want to build their own lines, custom lengths or non-standard applications.
  – AGS NiCop

SPECIFICATIONS:

• Bending Method: Tubing Bender Not Required
• California Proposition 65: WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov
• Finish: Black Anodized
• Fitting Type End 1: Inverted
• Fitting Type End 2: Inverted
• Fittings Included: Yes
• Length: 1.67 Foot
• Length: 20 Inches
• Material: Nickel – Copper
• Thread Size End 1 (in): 7/16 – 24
• Thread Size End 1 (mm): 7/16 – 24
• Thread Size End 2 (in): 7/16 – 24
• Thread Size End 2 (mm): 7/16 – 24
• Tube Outside Diameter (in): 0.25 Inch
• Tube Outside Diameter (mm): 6 mm

This item may interchange to the following part numbers from other brands. This is provided for reference only and does not guarantee that the part your are buying is identical to the part numbers from the brands listed below. To confirm that this part fits your vehicle, enter your vehicles Year, Make, Model, Trim and Engine in the Compatibility Table.

• FMSI CN420
• FMSI CN420

NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. – NiCopp Does Not Rust or Corrode – DOT Approved for Hydraulic Brake Systems – Bends 58% Easier than Steel Tubing
– AGS NiCopp is a nickel-copper alloy brake tubing that meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. –
– This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.
–

SHIPPING POLICY

• 99% of orders placed by 2pm Eastern Standard time will be shipped same day
• All orders are immediately sent to our distribution centers which may impact your ability to cancel the order once it's placed
• Many parts are stocked in more than one warehouse location. As a result your order may ship from a location other than the location shown in the listing. In most cases the shipping location will be closer to delivery address as we always try to ship from the closest warehouse to minimize transit times. In some circumstances intraday sales and other inventory changes may result in your item being shipped from a location further from your delivery address.
• Orders over $200.00 may be shipped signature required at no additional cost to you. We recommend shipping to a location where someone will be there to receive the package

RETURN POLICY

PartsHawk stands behind every item we sell. Occasionally, there may be an issue with your item or your order and we will do our best to ensure you are 100% satisfied. We offer a 60 day exchange or refund policy on all orders. Within 60 days or receipt of your order you may request a return for either an exchange or a refund. All product returns must be in the original packaging, have not been used, installed or damaged due to improper installation. All parts, hardware, documents and instructions must be included in the returns. PartsHawk will also support the manufacture’s warranty for all item during the warranty period offered by the manufacturer.

Return Check List

1. Original packaging
2. PartsHawk RMA (return merchandise authorization) form
3. All accessories & hardware
4. Any documents and instructions

How does shipping work?

Placing an order outside the US is easy! In fact, eBay handles the entire transaction for you once we have shipped the product to their warehouse in Kentucky. Once the order has shipped you will receive a tracking number from our warehouse to Kentucky and then another tracking number from Kentucky to you.

Additional Charges and Fees

Additional shipping, duties and taxes will be calculated by eBay during check out.

Outside the US? Don't worry,

PartsHawk is currently shipping to over 100 countries

Check the Shipping and Payments section above to see if this item can be shipped to you.

At times there is a delay in the carrier’s tracking for updates. Please allow up to 24 hours for your tracking to update. If you still do not see any movement, please contact our Customer Service Department and we will be happy to assist.

If there is no response when the package arrives, the driver may leave the package nearest to the street or make a second delivery attempt on the next business day. Please check your tracking info as it will let you know the next steps for delivery attempt.

1. Click on the “My eBay” menu on the top right
2. Find your order in your purchase history
3. If you paid using PayPal click “View PayPal transaction,” If you paid using a credit card click on “View order details” and a new page will open up
4. Click on “printer friendly page” right above the shipping address
5. Your eBay invoice will appear and you can print or save it from your browser

What if the tracking number is not working after 24 hours?

Depending on the size of your item, it could be shipped with a truck carrier and will require you to be present at time of delivery. Please feel free to reach out to us and we will provide additional details.

I have special delivery instructions (i.e. Leave by back door, leave with neighbor, place in the planter on the left of my garage, etc.)

We recommend leaving a note for the carrier on the door nearest to the street as we do not have a way to communicate those requests for you.

Many parts are stocked in more than one warehouse location. As a result your order may ship from a location other than the location shown in the listing. In most cases the shipping location will be closer to delivery address as we always try to ship from the closest warehouse to minimize transit times. In some circumstances intraday sales and other inventory changes may result in your item being shipped from a location further from your delivery address.

Do I have to be there to sign for my package?

If your order is over $250 there is a possibility it was shipped with a signature required option. The easiest way to check is to locate the tracking number for your order and open on the carrier’s website. There is no additional cost to you for this service.

Can I pickup my part/order from your warehouse?

Sorry, we do not offer the pickup in warehouse option as our warehouses do not have public access

How do I know if this part will fit my vehicle?

Check the vehicle compatibility guide above or just reach out to us. Updated 10.19.2023